How much should I charge for DTF transfers?
DTF is the easiest new service a shop can add, but it is also one of the easiest to underprice. So here is what film, ink and powder really cost in 2026, what wholesalers charge for gang sheets, and a simple way to set your own prices.
Price DTF by the square inch, not by the transfer. In-house film, ink and powder cost about $0.30 to $1.10 per square foot at full coverage. By comparison, public price lists sell a 22″ x 12″ gang sheet for about $5.40 to $16.99, roughly $0.02 to $0.06 per square inch. Price from your full cost, then check it against that range.
Updated November 2026 · By Steve, print shop owner and founder of Web2Ink
Why does DTF pricing matter more in 2027?
Because almost everyone offers it now. In fact, a 2025 PRINTING United and Apparelist survey found 65.7% of decorators offer DTF. When most shops down the road can sell the same transfer, the shop that knows its real cost can price with confidence. The shop that guesses, however, either loses jobs or loses money on them.
The good news is that DTF cost is easy to measure. Unlike screen printing, there are no screens, no color count and no setup per design. Instead, you pay for film by the area you run, and for ink and powder by the area you cover. That is why square inches are the natural unit.
What does DTF actually cost per square foot in 2026?
We pulled current supply prices from public US product pages in late October 2026, then converted them to cost per square foot. Usage rates come from manufacturer specs, such as Coltex and Procolored. Treat every line as a range, and plug in your own invoices when you have them.
| Input | Public price (source) | Usage assumption | Cost per sq ft |
|---|---|---|---|
| Roll film, 24″ x 328′ | $99.99 (Ninja Transfers) to $109.95 (Kingdom DTF) per roll | 656 sq ft per roll | $0.15 to $0.17 |
| Ink, budget | About $40 to $45 per liter (Kingdom DTF single liter and 6-liter pack) | 15 to 20 ml/m² color plus 20 to 30 ml/m² white (Coltex spec, via GJS) | $0.13 to $0.21 |
| Ink, premium | $80 to $120 per liter (range quoted by Axo Transfers) | Same, 35 to 50 ml/m² total | $0.26 to $0.56 |
| Adhesive powder | $18.99 per kg (DTF Bank) | About 1 kg per 42 m² (Procolored, via m8d.io) up to much heavier real-world use | $0.04 to $0.34 |
| Total at full coverage | about $0.30 to $1.10 |
Two notes. First, film is billed for the whole sheet, but ink and powder only go where the design is. A gang sheet that is 60% covered uses 60% of the ink and powder, and 100% of the film. Second, the powder range is wide on purpose, because real-world use varies. For example, Procolored’s figure works out to about 2 grams per square foot. However, other published figures, cited by m8d.io from dtf-france, run five to eight times higher. So weigh your powder bag at the start and end of a week, and then you will know your number.
Real shops also lose film and ink to test prints, nozzle checks, head cleans and misprints. For instance, Castle Ink’s 2026 guide puts most small shops at $1 to $3 in consumables per 11″ x 17″ sheet, which is about $0.77 to $2.31 per square foot. For planning, $1.00 per square foot of sold film is a sane middle number until you have your own data.
What are wholesalers charging for gang sheets right now?
Your customers can compare your price with these in two minutes, so you should too. These are public list prices we checked in late October 2026. Sale prices change often, so check each vendor’s site before you quote against them.
| Supplier | 22″ x 12″ sheet | Longer sheet | Per linear inch | Per sq in |
|---|---|---|---|---|
| Atlanta Vinyl Store | $6.00 sale ($12.29 regular) | 22″ x 240″ $106, or $96 each for 4+ | $0.40 to $0.50 | $0.018 to $0.023 |
| DTF Transfers Now | About $5.40 at its $0.45/inch standard rate | 30 to 100 ft wholesale rolls, $134.55 to $372.00 | $0.31 to $0.45 | $0.014 to $0.020 |
| Transfer Express | About $10.56 at its “as low as $0.04 per sq in” rate | 22″ x 24″ about $21.12 | About $0.88 | From $0.04 |
| Ninja Transfers | $16.99 | 22″ x 240″ $129.99; 22″ x 360″ $179.99 | $0.50 to $1.42 | $0.023 to $0.064 |
The pattern is clear. Single one-foot sheets run about $5 to $17, while long sheets drop to roughly $0.31 to $0.54 per linear inch. Similarly, a 2026 wholesale buying guide from Closo lands in the same place: about $3.50 to $6 per square foot for shops buying 10 or more sheets a month, and $8 to $12 per square foot for one-off sheets.
How do I build a DTF price from my own costs?
Use one formula and four inputs. Here it is:
Price = (consumables + labor + machine + overhead) per sq in ÷ (1 − target margin)
Margin is not markup. For example, a 50% margin means half the price is profit, which is the same as doubling cost. Likewise, a 40% margin means dividing cost by 0.6.
Worked example: one shop’s numbers
These are example inputs, not industry averages, so swap in yours.
- Consumables: $1.00 per sq ft, using the planning number above.
- Labor: Your setup turns out 15 linear feet of 22″-wide film an hour, powdered and cured. That is 27.5 sq ft an hour. So at $20 an hour for the operator, labor is $0.73 per sq ft.
- Machine: $12,000 for printer, shaker and dryer, paid off over three years, is $4,000 a year. If you sell 300 sq ft a week for 50 weeks, that is 15,000 sq ft. That is $0.27 per sq ft.
- Overhead: A share of rent, power, print heads and parts. Say $0.25 per sq ft.
Total cost: $1.00 + $0.73 + $0.27 + $0.25 = $2.25 per sq ft, or about $0.0156 per square inch. A 22″ x 12″ sheet is 264 square inches, or 1.83 sq ft, so it costs you about $4.13 to make. At a 50% margin, then, you charge $8.25. That sits above the cheapest sale prices but well below the top of the list. That is a fine place for a local shop with fast pickup to be.
Your tiered gang sheet price list
Give a smaller margin on longer sheets. Bigger orders take the same order handling as small ones, so you can afford it.
| Sheet size | Sq ft | Your cost at $2.25/sq ft | Target margin | Price | Per linear inch |
|---|---|---|---|---|---|
| 22″ x 12″ | 1.83 | $4.13 | 50% | $8.25 | $0.69 |
| 22″ x 60″ | 9.17 | $20.63 | 45% | $37.50 | $0.63 |
| 22″ x 120″ | 18.33 | $41.25 | 40% | $68.75 | $0.57 |
| 22″ x 240″ | 36.67 | $82.50 | 35% | $126.92 | $0.53 |
Compare the 22″ x 240″ line with the public prices above: $96 to $106 at Atlanta Vinyl Store and $129.99 at Ninja Transfers. You are in the range, and you also know exactly where your floor is. If a customer asks you to match $96, you can see you would still clear about 14% margin, and decide on purpose.
How should I price a single transfer by size?
Some customers want transfers, not sheets. Price each one by its area, add a nesting allowance for the gaps around it, and set a per-piece minimum so tiny prints still pay for handling. Here we add 15% for gaps and then use the $0.0156 cost per square inch from the example.
| Design size | Sq in | Your cost with 15% gap allowance | Price at 50% margin |
|---|---|---|---|
| 4″ x 3.5″ left chest | 14 | $0.25 | $0.50 |
| 8″ x 8″ youth front | 64 | $1.15 | $2.30 |
| 11″ x 11″ adult front | 121 | $2.17 | $4.35 |
| 12″ x 16″ full back | 192 | $3.45 | $6.90 |
For pressed garments, also add the blank and the press time. For example, say a blank tee costs you $3.50 and each press takes about a minute at $20 an hour, or $0.33. As a result, a shirt with a left chest and a full back costs $3.50 + $0.25 + $3.45 + $0.66 = $7.86. At a 50% margin, that is about $15.70 a shirt before any rush or art charge.
Should I price by the sheet, by the inch or by the transfer?
Best for other decorators and resellers: by the sheet or linear inch. They nest their own art and know what they want, so give them clear tiers and a fast turnaround.
Best for walk-in and small business customers: by the transfer or by the finished garment. They do not want to learn gang sheet layout. Instead, quote them a size and a price.
Best for teams and events: by the finished garment, with names and numbers priced as an add-on. See how custom team stores handle that.
If you also screen print, run the same cost exercise there. Our overview of DTF printing compares it with DTG and sublimation.
What DTF pricing mistakes cost shops the most?
- Pricing the design, not the film. A loose layout with big gaps still burns a full sheet of film. Price the sheet instead, or charge for the gaps.
- Forgetting art time. A blurry phone photo of a logo takes real time to fix. Charge for it, or use a tool that fixes it fast. In that case, an image vectorizer is the fast route.
- Matching the cheapest sale price. National sellers run deep promos. But your edge is local pickup, same-day turnaround and help with art. Price for that.
- No rush fee. Same-day jobs bump other work. Set a rush charge, for example 25% to 50%, and post it so nobody is surprised.
- Never rechecking costs. Since film and ink prices move, recheck your numbers every quarter.
How do I show DTF prices on my website?
When customers can see a price, they stop calling just to ask for one. On a Web2Ink site, the instant price quoter shows pricing on the product page with quantity tiers, print locations and setup charges, before the customer designs anything. You can sell finished DTF garments that way and also list gang sheet sizes as their own products with tiered prices.
The online designer also flags poor-quality uploads, and the image vectorizer and upscaler help turn a low-res logo into print-ready art. As a result, your margin is protected on the jobs where art fixes usually eat it. See how it fits a decorated apparel shop on our websites for DTG printers page, or compare plans on the pricing page.
Put your DTF prices online
Show sheet and garment prices on the product page, take orders day and night, and get print-ready art. Plans from $79/mo, no contract, 30-day money-back guarantee.
Frequently asked questions
How much should I charge for a 22 x 12 DTF gang sheet?
Public price lists in late 2026 ran from about $5.40 to $16.99 for a 22″ x 12″ sheet. If your full cost is around $4 a sheet, a price near $8 gives you a 50% margin and sits mid-market. But work out your own cost first.
What does DTF cost per square inch to make?
Film, ink and powder alone run about $0.30 to $1.10 per square foot at full coverage, or roughly $0.002 to $0.008 per square inch. Once you add labor, machine payoff, waste and overhead, the worked example in this guide lands at about $0.016 per square inch.
How much DTF ink does a print use?
One ink maker’s spec puts color at 15 to 20 ml per square meter and white at 20 to 30 ml per square meter. That is about 3.3 to 4.6 ml per square foot of full coverage. Of course, dark garments and heavy white underbase push you to the high end.
Is it cheaper to print DTF in-house or buy wholesale gang sheets?
Buying is cheaper until you sell enough to keep a printer busy, because the machine payoff and labor spread over few square feet. Many shops buy sheets first, track demand, and bring DTF in-house once volume is steady.
Should I price DTF by the sheet or by the transfer?
Price by the sheet or linear inch for decorators and resellers who nest their own art. On the other hand, price by the transfer or finished garment for retail customers, who just want a size and a price.
People also asked questions
What margin should a print shop make on DTF transfers?
There is no single right number, but many shops aim for about 40% to 50% gross margin on small sheets and a little less on long sheets. Use the formula price equals cost divided by one minus margin, so a $4 cost at 50% margin is $8.
How do I add a DTF pricing calculator to my website?
Use a website platform that shows prices on the product page by size, quantity and print location. On Web2Ink, the instant price quoter does this with quantity tiers and setup charges, so customers see a price before they order.
About Web2Ink: A web-to-print platform and custom website for screen printers, embroiderers, DTF and sign shops, with an online designer, instant quoting and company stores. From $79/mo. Based in Charlotte, North Carolina.




